|
|
|
|
 |
|
|
Compression Mounting
Compression mounting is an economical method of encapsulating samples that can withstand the pressure and heat of the mounting process. A variety of mounting powders and preforms are available for this application.
| Phenolic Powders and Preforms |
|
Black, green and red phenolics are used for routine
applications when color-coding for material identification,
or as backfill for more expensive mounting powders.
Preforms require no measuring, are cleaner than loose
powder and are easier to use.
|
|
| Item No. |
Description |
| 135-10005 |
Black Powder, 5 lb. (2.3kg) |
  |
| 135-10005-B |
Black Powder, 250 lb. (113 kg) |
|
| 135-10007 |
Black Powder, 25 lb. (11.5kg) |
|
| 135-10010 |
Green Powder, 5 lb. (2.3kg) |
|
| 135-10010-B |
Green Powder, 250 lb. (113 kg) |
|
| 135-10012 |
Green Powder, 25 lb. (11.5kg) |
|
| 135-10015 |
Red Powder, 5 lb. (2.3kg) |
|
| 135-10017 |
Red Powder, 25 lb. (11.5kg) |
|
| 135-10020 |
Orange Powder, 5 lb. (2.3kg) |
|
| 135-10021 |
Orange Powder, 25 lb. (11.5kg) |
|
| 135-20005 |
Black Preform for 1¼" Mold, Pk/500 |
|
| 135-20010 |
Green Preform for 1¼" Mold, Pk/500 |
|
| 135-20015 |
Red Preform for 1¼" Mold, Pk/500 |
|
| 135-30005 |
Black Preform for 1½" or 40 mm Mold, Pk/500 |
|
| 135-30010 |
Green Preform for 1½" or 40 mm Mold, Pk/500 |
|
| 135-30015 |
Red Preform for 1½" or 40 mm Mold, Pk/500 |
|
| 135-40005 |
Black Preform for 2" or 50 mm Mold, Pk/100 |
|
| 135-40010 |
Green Preform for 2" or 50 mm Mold, Pk/100 |
|
| 135-40015 |
Red Preform for 2" or 50 mm Mold, Pk/100 |
|
| 155-10010 |
Copper-based, 1 lb. (0.45 kg) |
|
|
|
|
|
| Blue Diallyl Phthalate Powder |
|
Glass or mineral-filled mounting material that provides
excellent edge retention and chemical resistance.
|
|
|
| Black Glass Filled Epoxy Powder |
|
Very hard epoxy mounting material with glass fiber filler
which provides excellent specimen adhesion and edge
retention. Mold release is recommended.
|
|
|
| Transparent Thermoplastic Powder |
|
A clear mounting material for easy sample observation.
|
|
|
| Conductive Powder |
|
Mounting material used to make conductive samples for scanning electron microscopy and electrolytic polishing. The copper-based powder provides very good edge retention and should be used for analyzing samples where copper is not a primary constituent. The graphite-based powder offers a higher hardness and is recommended for specimens without carbon as a component.
|
|
|
|
|
| All contents copyright © 2004 Allied High Tech Products, Inc. All rights reserved. All product names are trademarks or registered trade marks of their respective holders. Terms of Use. |
|
|
